Mafi mahimmancin fasalin wannan inji shine wanda zai iya yin gefen ƙasa ƙasa da kuma bakin miter a tafiya ɗaya na gilashi.

Kayan aikin miter na al'ada yana buƙatar tafiye-tafiye biyu, na farkon layi, sannan gefen miter.

Bayanin kayan aiki:

1. Wannan injin yana da injina guda 6 (No.1-No.6) wanda zai iya aiwatar da gefen gefen gilashi da kuma gaban gaban (0-60 digiri), Motors 3 (No.7-No.9) wanda zai iya sarrafa gilashin miter na gilashi kuma ma gefen ƙasa. tare da 2 Motors for raya seaming. Duk tsari an gama shi a tafiya daya.

Don yin gyare-gyare / gogewa, No.1-No.6 Motors suna buƙatar tsayawa a kan digiri na ZERO kuma ana iya canza motar No.7-9 zuwa digiri 45 don gaban arris.

Don yin miter da gefen ƙasa, ana iya haɗa injunan No1-No.6 zuwa digiri ɗin da aka nema kuma juya No.7-No.9 Motors zuwa digiri na ZERO don aikin gefen gefen ƙasa.

2. Wannan na’urar tana amfani da tsarin BAYAR DA KAI. Ya dace da ƙaramin gilashi (40mmx40mm) da gilashin nauyi (4mx4m) aiki.

3. Injin yana da injin kare kaurin gilashi. Lokacin da aka saka gilashin kauri mara kyau a cikin inji. Injin zai tsaya kai tsaye. Wannan yana kare bearings daga murkushewa.

4. Injin ya ɗauki sarrafa PLC da haɗin keɓaɓɓen aiki (Touch allo). Injin yana da halaye na aiki guda 2, jagora da cikakken yanayin aiki na atomatik. A cikin yanayin atomatik, sigogin glas na iya zama shigar ta allon taɓawa. A cikin yanayin jagora, ana iya aiki da inji ta hanyar sauyawa akan allon aiki.

5. Loading / off loading conveyor yi amfani da lokaci bel. Yana iya daidaita tsawo don saita cire gilashin daban.

6. Gilashin tallafawa gilashi suna amfani da sandar extrusion ta Aluminium, tare da rollers na roba.  

7. An yi murfin mai ɗaukar kaya a cikin baƙin ƙarfe.

8. Man shafawa.

Na'urar ta tanada famfo na shafa mai na atomatik, wanda ke shafa mai na gaba da na baya.

Duk shimfidar shimfida (ciki harda motsin mai dauke da kayan motsi, sashin motsi mai nika, faranti masu motsi) ana shafa mai ne da tsarin mai. Kyakkyawan tsarin man shafawa na man ya tabbatar da rayuwar injin inji da tsawan lokaci mai gudana.

9. Motar jigilar kaya ta gaba tana da babura. Yana za a iya gyara ta hanyar lantarki button a kan aiki panel. An nuna kaurin a allo. Hakanan akwai karatun inji don nuna kaurin gilashi.  

10. Za'a iya daidaita saurin aiki ta hanyar inverter mitar.

11. wheelarshen gogewar ƙarshe shine CE3 ko X3000, ba a ji ba. Ba a raba tankin ƙafafun.

12. Tankunan ƙafafun don ƙafafun m kwana ƙafafun 6 da na tsakiya uku (Pos.7.8.9) suna amfani da tsarin juyawa.  

13. Ana iya nuna kwana a cikin allo.

14. Motar tana amfani da madaidaicin madaidaiciyar motar da ABB yayi, wanda yake na musamman ne don kayan masarufi.

15. Tsarin ruwa

Ruwa yana yawo a cikin injin da tankin ruwa mai bakin ruwa. Kayayyakin tankin dabaran suna haɗawa tare da bututun magudanan ruwa guda ɗaya wanda yake da sauƙin shigarwa. Ana haɗa bututun ruwa na murabba'i don mashigar ruwa tare da kowane ƙwanƙolin ƙafa.

16. Girman gilashin da aka sarrafa yana da haske da santsi, yana zuwa gab da gilashin asali. Hakanan ana nuna wannan injin ɗin ta hanyar kewayon aiki mai sauƙi da aiki mai sauƙi.